- Created: Monday, 02 September 2013 12:00
- Last Updated: Monday, 19 May 2014 13:03
- Written by Jorrit
For the wing extra wooden ribs are placed to distribute the generated wind forces on the mast. To produce these ribs, they are first drawn in Alibre, exported as step, imported into the CAM software and finally the generated NC code is processed by USBCNC in the Science Centre Delft Milling machine
Impression of the ribs in the wing
The first set of the produced ribs.
Milling the centre boom.
(Almost) all ribs done!